Replacement Brushes for Tennant T350

Brushes used on the Tennant T350

OEM part numbers are listed for cross-reference only. Sizes are confirmed against your old brush or drawing before production.

Fill options

• Disc scrub brush (500 mm, 3-lug): Nylon: general scrubbing on finished floors (Tennant lists a nylon version); Polypropylene: everyday scrubbing (Tennant lists a polypropylene version); Super abrasive grit filament: heavy soil, stripping and textured concrete
• Disc scrub brush (500 mm, Insta-Click): Nylon: general scrubbing on finished floors (Tennant lists a nylon version); Polypropylene: everyday scrubbing (Tennant lists a polypropylene version); Super abrasive grit filament: heavy soil, stripping and textured concrete
• Disc scrub brush (600 mm, 3-lug): Nylon: general scrubbing on finished floors (Tennant lists a nylon version); Polypropylene: everyday scrubbing (Tennant lists a polypropylene version); Super abrasive grit filament: heavy soil, stripping and textured concrete
• Disc scrub brush (600 mm, Insta-Click): Nylon: general scrubbing on finished floors (Tennant lists a nylon version); Polypropylene: everyday scrubbing (Tennant lists a polypropylene version); Super abrasive grit filament: heavy soil, stripping and textured concrete
• Pad driver: 3-lug drivers 1212960 (500 mm) and 1213038 (600 mm); Insta-Click drivers 1209197 (500 mm) and 1209160 (600 mm)

Matching products we build

PP Disc Scrub Brush, 12–21 in

Polypropylene, 0.5–0.6 mm standard

Built to your T350's dimensions

Short-Trim Pad Driver, 12–21 in (Tennant 1220222 type)

Polypropylene short-trim bristle

Built to your T350's dimensions

Variants and what to check

Part numbers are listed as nylon, polypropylene, abrasive. The T350 brushes share part numbers with the T300 500 mm and 600 mm decks on Tennant's sheets. The 600 mm dual-disk deck needs two brushes. Insta-Click is standard on the T350 spec sheet, but 3-lug brushes are also listed, so check the hub before ordering.

What to send us for a quote

• Outer diameter of the brush or pad driver, measured across the bristle tips.
• The drive hub on top: clutch-plate type, number of lugs, or the hole pattern — a clear photo is usually enough.
• Trim length (how far the bristles stick out of the block) and the current fill: polypropylene, nylon or abrasive grit.
• For cylindrical decks: overall length, core diameter and the shape of the drive ends.
• Your machine model (Tennant T350) and, if you have it, the OEM part number from the old brush.

Frequently asked questions

Does the T350 use one brush or two?

The 20 in (500 mm) model uses one disk brush; the 24 in (600 mm) model is dual-disk and needs two.

Are T350 brushes the same as T300 brushes?

On Tennant's sheets the 500 mm and 600 mm T350 brush numbers (for example 1213032, 500 mm Insta-Click polypropylene) also appear on the T300 sheet.

Which hub type does my T350 have?

Tennant's spec sheet lists Insta-Click as standard, but 3-lug brushes are also listed. Look at the drive plate under the deck before ordering.

Machines sharing these part numbers

Other Tennant machines

Further reading