Replacement Brushes for Tennant T3
walk-behind floor scrubber · cleaning path 17 in (430 mm) or 20 in (510 mm) · also listed as T3+, T3e
Supplier: BrushSourcing (Meow77 LLC)
Source: Partner factories in Yuantan, Qianshan, Anhui, China
Products: Replacement disc scrub brush (17 in deck), disc scrub brush (20 in deck) for Tennant T3
Custom: OEM/ODM, made to order — send spec, drawing or sample for a quote within 24 hours
Contact: sales@brushsourcing.com · WhatsApp +1 (928) 732-9273 · https://brushsourcing.com
The Tennant T3 is a compact single-disk walk-behind scrubber, sold as a 17 in (430 mm) pad-assist model and 20 in (510 mm) pad-assist or traction-drive models. Tennant's spec sheet lists a 230 rpm brush and two down-pressure settings (50 and 90 lb).
Brushes used on the Tennant T3
| Position | Qty | Size | OEM part no. | Mount |
|---|---|---|---|---|
| Disc scrub brush (17 in deck) | 1 | 17 in (430 mm) | 1016764, 1016765, 4035182, 4035183 | 3-lug |
| Disc scrub brush (20 in deck) | 1 | 20 in (500 mm) | 1016810, 1016811, 1016805, 4035186, 4035187, 4035185 | 3-lug |
OEM part numbers are listed for cross-reference only. Sizes are confirmed against your old brush or drawing before production.
Fill options
- Disc scrub brush (17 in deck): Nylon (1016764 / 4035182); Polypropylene (1016765 / 4035183)
- Disc scrub brush (20 in deck): Nylon (1016810 / 4035186); Polypropylene (1016811 / 4035187); Abrasive (1016805 / 4035185)
Matching products we build
Variants and what to check
The T3 shares its 3-lug 17 in and 20 in disk brushes with the T300 single-disk decks. Aftermarket listings name the T3 and T3+ against those numbers, and the superseded 40xxxxx numbers match Tennant's current T300 sheet. Check the deck size (17 or 20 in) printed on the machine, and confirm that the hub is 3-lug rather than an Insta-Click plate.
What to send us for a quote
- Outer diameter of the brush or pad driver, measured across the bristle tips.
- The drive hub on top: clutch-plate type, number of lugs, or the hole pattern — a clear photo is usually enough.
- Trim length (how far the bristles stick out of the block) and the current fill: polypropylene, nylon or abrasive grit.
- For cylindrical decks: overall length, core diameter and the shape of the drive ends.
- Your machine model (Tennant T3) and, if you have it, the OEM part number from the old brush.
Frequently asked questions
- What size brush does a Tennant T3 take?
- One disk brush: 17 in (430 mm) on the 17 in model, or 20 in on the 20 in (510 mm) models.
- Do T3 brushes fit the T300?
- Aftermarket listings give the same 3-lug numbers (for example 1016811, 20 in polypropylene) for the T3, T3+ and T300/T300e.
- What replaced part 1016765?
- Aftermarket listings show 1016765 (17 in polypropylene) superseded by 4035183, which matches Tennant's current T300 sheet for the 430 mm 3-lug polypropylene brush.
Machines sharing these part numbers
Other Tennant machines
Further reading
Tennant and T3 are trademarks of their respective owner and are used here only to identify the machine these replacement brushes fit. BrushSourcing is not affiliated with or endorsed by Tennant; all brushes are aftermarket replacements made to order.