Replacement Brushes for Nobles Speed Scrub 300
walk-behind floor scrubber · also listed as SS300
Supplier: BrushSourcing (Meow77 LLC)
Source: Partner factories in Yuantan, Qianshan, Anhui, China
Products: Replacement disc scrub brush (17 in), disc scrub brush (20 in) for Nobles Speed Scrub 300
Custom: OEM/ODM, made to order — send spec, drawing or sample for a quote within 24 hours
Contact: sales@brushsourcing.com · WhatsApp +1 (928) 732-9273 · https://brushsourcing.com
The Nobles Speed Scrub 300 (SS300) is a Tennant-group walk-behind scrubber that shares its single-disk brush range with the Tennant T300. Aftermarket listings give 17 in and 20 in 3-lug disk brushes for it.
Brushes used on the Nobles Speed Scrub 300
| Position | Qty | Size | OEM part no. | Mount |
|---|---|---|---|---|
| Disc scrub brush (17 in) | 1 | 17 in | 1016764, 1016765 | 3-lug |
| Disc scrub brush (20 in) | 1 | 20 in | 1016810, 1016811, 1016805 | 3-lug |
OEM part numbers are listed for cross-reference only. Sizes are confirmed against your old brush or drawing before production.
Fill options
- Disc scrub brush (17 in): Nylon (1016764, superseded by 4035182); Polypropylene (1016765, superseded by 4035183)
- Disc scrub brush (20 in): Nylon (1016810, superseded by 4035186); Polypropylene (1016811, superseded by 4035187); Abrasive (1016805, superseded by 4035185)
Matching products we build
Variants and what to check
These are the same 3-lug numbers Tennant lists for the T300 430 mm and 500 mm decks, now superseded by the 40xxxxx series. Check the deck size and whether the hub is 3-lug before ordering. No Nobles-branded parts sheet was found to confirm larger or cylindrical decks.
What to send us for a quote
- Outer diameter of the brush or pad driver, measured across the bristle tips.
- The drive hub on top: clutch-plate type, number of lugs, or the hole pattern — a clear photo is usually enough.
- Trim length (how far the bristles stick out of the block) and the current fill: polypropylene, nylon or abrasive grit.
- For cylindrical decks: overall length, core diameter and the shape of the drive ends.
- Your machine model (Nobles Speed Scrub 300) and, if you have it, the OEM part number from the old brush.
Frequently asked questions
- Do Tennant T300 brushes fit the Nobles Speed Scrub 300?
- Aftermarket listings give the same 3-lug 17 in and 20 in numbers (for example 1016811) for the Speed Scrub 300 and the T300.
- What replaced Speed Scrub 300 brush 1016810?
- It is listed as superseded by 4035186, a 20 in nylon 3-lug brush.
- What brush sizes are listed for the SS300?
- 17 in and 20 in single disk brushes.
Machines sharing these part numbers
Further reading
Nobles and Speed Scrub 300 are trademarks of their respective owner and are used here only to identify the machine these replacement brushes fit. BrushSourcing is not affiliated with or endorsed by Nobles; all brushes are aftermarket replacements made to order.