Replacement Brushes for Tennant T20
industrial ride-on floor scrubber · cleaning path 40 in / 1,020 mm cylindrical; 42 in / 1,070 mm disk (54 in with scrubbing side brush)
Supplier: BrushSourcing (Meow77 LLC)
Source: Partner factories in Yuantan, Qianshan, Anhui, China
Products: Replacement disc scrub brush (main), cylindrical scrub brush (main), side scrub brush (disc), side sweep broom (disc), pad driver for Tennant T20
Custom: OEM/ODM, made to order — send spec, drawing or sample for a quote within 24 hours
Contact: sales@brushsourcing.com · WhatsApp +1 (928) 732-9273 · https://brushsourcing.com
The Tennant T20 is an industrial engine-powered (gasoline, LPG or diesel) rider scrubber. It runs either three 14 in disks across a 42 in path or two 40 in cylindrical brushes 12 in (300 mm) in diameter, with an optional side brush for scrubbing or sweeping.
Brushes used on the Tennant T20
| Position | Qty | Size | OEM part no. | Mount |
|---|---|---|---|---|
| Disc scrub brush (main) | 3 | 14" (356 mm) dia | 1220238, 1220237, 1220239 | Confirmed by measurement |
| Cylindrical scrub brush (main) | 2 | 40" (1020 mm) long, 12 in (300 mm) dia | 1027697, 1026223, 1030969, 1026222, 4031767, 4034238 | Confirmed by measurement |
| Side scrub brush (disc) | 1 | 16" (406 mm) dia | 1220235, 1220236, 1221543 | Confirmed by measurement |
| Side sweep broom (disc) | 1 | 24" (610 mm) dia (parts sheet) | 1220185 | Confirmed by measurement |
| Pad driver | 3 | 14 in | 1220198 | Confirmed by measurement |
OEM part numbers are listed for cross-reference only. Sizes are confirmed against your old brush or drawing before production.
Fill options
- Disc scrub brush (main): Nylon (1220238); Polypropylene (1220237); Super abrasive (1220239)
- Cylindrical scrub brush (main): Polyester (1027697); Polypropylene (1026223, superseded by 4034238); Heavy-duty polypropylene (1030969, superseded by 4031767); Super abrasive (1026222)
- Side scrub brush (disc): Nylon (1220235); Heavy-duty polypropylene (1220236); Super abrasive (1221543)
- Side sweep broom (disc): Polypropylene sweep brush (1220185)
- Pad driver: DuraSafe pad driver 1220198
Matching products we build
Variants and what to check
The disk deck uses three brushes, not two. The 40 in cylindrical brushes are shared with the M20 sweeper-scrubber. Aftermarket sites show 1030969 superseded by 4031767 and 1026223 by 4034238. The sweeping side brush (cylindrical machines only) is 24 in on the parts sheet but 21 in (533 mm) on the spec sheet, so measure the old broom.
What to send us for a quote
- Outer diameter of the brush or pad driver, measured across the bristle tips.
- The drive hub on top: clutch-plate type, number of lugs, or the hole pattern — a clear photo is usually enough.
- Trim length (how far the bristles stick out of the block) and the current fill: polypropylene, nylon or abrasive grit.
- For cylindrical decks: overall length, core diameter and the shape of the drive ends.
- Your machine model (Tennant T20) and, if you have it, the OEM part number from the old brush.
Frequently asked questions
- How many disc brushes does a Tennant T20 use?
- Three 14 in (356 mm) disks across a 42 in (1,070 mm) path.
- What replaced T20 brush 1030969?
- Aftermarket listings show the 40 in heavy-duty polypropylene cylindrical brush 1030969 superseded by 4031767.
- Do T20 cylindrical brushes fit the M20?
- Yes. Tennant lists the same four 40 in cylindrical numbers (1027697, 1026223, 1030969, 1026222) for both.
Machines sharing these part numbers
Other Tennant machines
Further reading
Tennant and T20 are trademarks of their respective owner and are used here only to identify the machine these replacement brushes fit. BrushSourcing is not affiliated with or endorsed by Tennant; all brushes are aftermarket replacements made to order.