Replacement Brushes for Nilfisk SC2000
micro ride-on floor scrubber · cleaning path 530 mm (20-21 in) · also listed as SC2000 53B, Advance SC2000
Supplier: BrushSourcing (Meow77 LLC)
Source: Partner factories in Yuantan, Qianshan, Anhui, China
Products: Replacement disc scrub brush (prolene, standard), disc scrub brush (other fills), pad holder for Nilfisk SC2000
Custom: OEM/ODM, made to order — send spec, drawing or sample for a quote within 24 hours
Contact: sales@brushsourcing.com · WhatsApp +1 (928) 732-9273 · https://brushsourcing.com
The Nilfisk SC2000 is a micro ride-on scrubber-dryer with a 530 mm single-disc deck at 155 rpm, designed to replace walk-behinds in mid-size areas. Its standard brush is the same 530 mm Prolene disc used on the SC500 walk-behind.
Brushes used on the Nilfisk SC2000
| Position | Qty | Size | OEM part no. | Mount |
|---|---|---|---|---|
| Disc scrub brush (Prolene, standard) | 1 | 530 mm | L08837025 | Confirmed by measurement |
| Disc scrub brush (other fills) | 1 | 530 mm (sold as 19–20 in) — confirmed by measurement | L08837026, L08837027, L08837028, L08837029, L08837065, L08837066, L08837067 | Confirmed by measurement |
| Pad holder | 1 | 20 in | L08837018 | Confirmed by measurement |
OEM part numbers are listed for cross-reference only. Sizes are confirmed against your old brush or drawing before production.
Fill options
- Disc scrub brush (Prolene, standard): Polypropylene (Prolene/Prolite) for routine daily scrubbing; the softer Prolite grade for finished or delicate floors
- Disc scrub brush (other fills): Prolite (L08837026); Union Mix (L08837027); Grit 180 (L08837028); Grit 240 (L08837029); Grit 46 (L08837065); Grit 80 (L08837066); Grit 500 (L08837067)
Matching products we build
Variants and what to check
The SC2000 rides on one disc. Nilfisk's catalog names 'Schrubbbürste Prolene (530 mm) L08837025' as standard equipment; the full brush range is shared with the SC500 and SC450, so the same stock covers all three machines.
What to send us for a quote
- Outer diameter of the brush or pad driver, measured across the bristle tips.
- The drive hub on top: clutch-plate type, number of lugs, or the hole pattern — a clear photo is usually enough.
- Trim length (how far the bristles stick out of the block) and the current fill: polypropylene, nylon or abrasive grit.
- For cylindrical decks: overall length, core diameter and the shape of the drive ends.
- Your machine model (Nilfisk SC2000) and, if you have it, the OEM part number from the old brush.
Frequently asked questions
- Is the SC2000 brush the same as the SC500 brush?
- Yes. Both use the L08837xxx 530 mm disc family, with L08837025 Prolene as standard.
- How many brushes does the SC2000 need?
- One.
- Can I run pads on the SC2000?
- Yes, with pad holder L08837018.
Machines sharing these part numbers
Other Nilfisk machines
Further reading
Nilfisk and SC2000 are trademarks of their respective owner and are used here only to identify the machine these replacement brushes fit. BrushSourcing is not affiliated with or endorsed by Nilfisk; all brushes are aftermarket replacements made to order.