Replacement Brushes for Kärcher B 60 W

Brushes used on the Kärcher B 60 W

OEM part numbers are listed for cross-reference only. Sizes are confirmed against your old brush or drawing before production.

Fill options

• Disc scrub brush (D55 head): Red, medium (standard maintenance scrubbing) - 4.905-014.0; Natural, soft (cleaning and polishing textured floors) - 4.905-016.0; White, very soft (sensitive floors) - 4.905-015.0; Black, hard (deep cleaning of hard-wearing floors) - 4.905-017.0
• Disc scrub brush (D65 head): Red, medium (standard maintenance scrubbing) - 4.905-010.0; Natural, soft (cleaning and polishing textured floors) - 4.905-012.0; White, very soft (sensitive floors) - 4.905-011.0; Black, hard (deep cleaning of hard-wearing floors) - 4.905-013.0
• Cylindrical scrub brush (R55 head): White, soft (sensitive floors, polishing) - 6.906-977.0; Red, medium (standard) - 4.035-193.0; Orange, high/low bristle (structured floors and joints) - 6.906-978.0; Green, hard (stubborn dirt, hard-wearing floors) - 6.906-979.0; Black, very hard (very sticky dirt, deep cleaning) - 6.906-980.0
• Cylindrical scrub brush (R65 head): White, soft (sensitive floors, polishing) - 6.906-981.0; Red, medium (standard) - 4.035-187.0; Orange, high/low bristle (structured floors and joints) - 6.906-982.0; Green, hard (stubborn dirt, hard-wearing floors) - 6.906-983.0; Black, very hard (very sticky dirt, deep cleaning) - 6.906-984.0

Matching products we build

Disc Scrub Brush for Kärcher BD Scrubber-Dryers

Polypropylene (poly) bristle

Built to your B 60 W's dimensions

45 in Double-Chevron Cylindrical Scrub Brush for Tennant S30

Nylon, poly, Proex or mixed wire on plastic core

Built to your B 60 W's dimensions

Short-Trim Pad Driver, 12–21 in (Tennant 1220222 type)

Polypropylene short-trim bristle

Built to your B 60 W's dimensions

Variants and what to check

Kärcher brush heads: D55 (two 300 mm discs), D65 (two 355 mm discs), R55 (two 532 mm rollers), R65 (two 638 mm rollers). Discs and rollers are always replaced in pairs. The datasheet lists a 280 mm STRONG and a 335 mm pad drive board without stating which head each fits; by size they correspond to the D55 and D65 heads - confirm against your head.

What to send us for a quote

• Outer diameter of the brush or pad driver, measured across the bristle tips.
• The drive hub on top: clutch-plate type, number of lugs, or the hole pattern — a clear photo is usually enough.
• Trim length (how far the bristles stick out of the block) and the current fill: polypropylene, nylon or abrasive grit.
• For cylindrical decks: overall length, core diameter and the shape of the drive ends.
• Your machine model (Kärcher B 60 W) and, if you have it, the OEM part number from the old brush.

Frequently asked questions

How many brushes does the Kärcher B 60 W use?

Two - either two disc brushes or two roller brushes, depending on the brush head.

What size discs fit the B 60 W D65 head?

Two 355 mm disc brushes (red medium standard 4.905-010.0).

Can I convert a B 60 W from disc to roller?

Yes, Kärcher sells the heads separately (R55 S, R65 S, D55 S, D65 S); the brushes then follow the new head.

Machines sharing these part numbers

Other Kärcher machines

Further reading