Replacement Brushes for Johnston CX201
compact street sweeper · also listed as C201, CN201, C200
Supplier: BrushSourcing (Meow77 LLC)
Source: Partner factories in Yuantan, Qianshan, Anhui, China
Products: Replacement side brush (disc broom), polypropylene, side brush (disc broom), steel, side brush (disc broom), poly/steel, third brush (option) for Johnston CX201
Custom: OEM/ODM, made to order — send spec, drawing or sample for a quote within 24 hours
Contact: sales@brushsourcing.com · WhatsApp +1 (928) 732-9273 · https://brushsourcing.com
The Johnston CX201 (and the CN201 built alongside it) is the C201 compact suction sweeper covered by one Johnston operator's guide and parts catalogue. It runs two front disc brushes on independent arms ahead of the suction nozzle, with an optional demountable third brush.
Brushes used on the Johnston CX201
| Position | Qty | Size | OEM part no. | Mount |
|---|---|---|---|---|
| Side brush (disc broom), polypropylene | 2 | 495 mm plate / 800 mm OD, 4-hole, bolt circle 365 mm | 70104-1S, 70104-1 | 4-hole, 365 mm bolt circle (TK) |
| Side brush (disc broom), steel | 2 | 490 mm plate / 770 mm OD flat wire, 4-hole, bolt circle 365 mm | 71343-1 | 4-hole, 365 mm bolt circle (TK) |
| Side brush (disc broom), poly/steel | 2 | 495 mm plate / 850 mm OD mixed fill, 4-hole, bolt circle 365 mm | 71107-1, 71343-2 | 4-hole, 365 mm bolt circle (TK) |
| Third brush (option) | 1 | Confirmed by measurement | 70104-1S | Confirmed by measurement |
OEM part numbers are listed for cross-reference only. Sizes are confirmed against your old brush or drawing before production.
Fill options
- Side brush (disc broom), polypropylene: Polypropylene for light litter and dust-sensitive areas
- Side brush (disc broom), steel: Flat steel wire for compacted gutter debris
- Side brush (disc broom), poly/steel: Poly/steel mix for general street sweeping
- Third brush (option): Polypropylene (as listed in the 3rd-brush parts page)
Matching products we build
Variants and what to check
Johnston's C201 parts catalogue lists three interchangeable brush fills for the brush plate (qty 2): 70104-1S polypropylene, 71343-1 steel and 71107-1 poly/steel; Johnston's suggested-stock list uses 70104-1 and 71107-1. The optional third brush also takes 70104-1S. Replacement listings show the same broom family for C50/C101/C200/C201/C202 on a 4-hole, 365 mm bolt circle. Check the plate pattern if your machine is an older C200.
What to send us for a quote
- Gutter broom: outer diameter across the bristle tips, plate / base diameter and the bolt pattern or quick-change mount.
- Main broom: overall length, outer diameter and core; for wafer brooms the wafer OD × ID and the drive-pin position.
- Current fill — poly, flat or crimped steel wire, or a mix — and whether the broom is left- or right-hand.
- Your machine model (Johnston CX201) and, if you have it, the OEM part number from the old brush.
Frequently asked questions
- What brushes are listed for the Johnston CX201?
- The C201 parts catalogue (covering CN201/CX201) lists 70104-1S polypropylene, 71343-1 steel and 71107-1 poly/steel brushes, two per machine.
- Does the third brush use a different broom?
- The third-brush parts page lists the same 70104-1S polypropylene brush on its own plate and cast hub.
- What diameter is the CX201 brush?
- Johnston's parts documents don't give a diameter; replacement listings quote roughly 770–850 mm depending on fill, so measure your old broom across the bristle tips before ordering.
Other Johnston machines
Further reading
Johnston and CX201 are trademarks of their respective owner and are used here only to identify the machine these replacement brushes fit. BrushSourcing is not affiliated with or endorsed by Johnston; all brushes are aftermarket replacements made to order.